Silicone Water Repellents

Product Details:

SS ER 750 is a reactive siloxane emulsion ( Water dilutablev) specifically engineered for used to impart water repellency to all types of woven, knit and nonwoven fabrics. When used with a catalyst, it provides durable water repellency.

When used in Paints, Inks & Coatings, upon heating the polymer will crosslink at the site of the hydrogen atoms to form a durable film.

SS ER 750 Emulsion is readily diluted with water. If a catalyst is used, dilute the catalyst in water and then add to the previously diluted silicone emulsion for optimum bath stability.

 For use as a textile treatment, 1 percent silicone solids based on the dry weight of the fabric is typically required. The dilute solution is typically applied to a substrate by padding.

For example -                                   Water: 97%

SS ER 750 Emulsion: 3%

Additional Information:

• Delivery Time: 5 days
• Packaging Details: 200 kg HDPE Drums

Product Details:

Potassium methylSiliconate is an aqueous solution of Potassium methylSiliconate, water dilutable having slightly yellowish appearance used for the impregnation of mineral construction materials to make them water-repellent without significantly reducing water vapor permeability. Treatment with potassium methylsiliconate prevents efflorescence of salts absorbed and makes cleaning of the tiled floor easier. Low fired clay products such as roof tiles, bricks, unglazed floor tiles absorb water and the soluble salts are transported to the surface, disfiguring the product.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: 200kg

Product Details:

Rust remover and Protective lubricant (SS WRC)SS WRC is a Specialty Lubricant used as Corrosion Protection, Rust Loosener & remover, Water repellent and Lubricant for metals and metal bonded parts.

Typical Values – Should not be considered as specifications.

Water Repellent For Metals,Water Repellent For Metals,Water Repellent For Metals,Water Repellent For Metals,Water Repellent For Metals

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: 200 lit

Product Details:

SSWR 1100 is a solvent less, water- soluble, Silane Emulsion. As water-repellent primer for emulsion paints and plasters, silicone resin, Emulsion paints and silicone resin plasters, as well as for concrete coatings.

Typical Values – Should not be considered as specifications. 

Silane Based Water Repellent,Silane Based Water Repellent,Silane Based Water Repellent, Silane Based Water Repellent.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

 

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: 200 kg

Product Details:

Reactive Silicone emulsion (Aquarest 1300) AQUAREST WR 1300 is reactive Fluid emulsion especially designed for treating substrates to impart and improve water repellent properties.Examples are Textiles and Fibers, Paper, Wood and wood articles, Gypsum Board, Plywood, and Particle Board, Powder, Fire fighting foam & Insulating materials.

Typical Values – Should not be considered as specifications.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: 200 kg

Product Details:

We are manufacture of Penetrating nano polymer water repellent / water proofing agent, for multiple applications in construction industry.
It acts as concrete sealer by penetrating and reacting with pores and capillarys walls, there by blocking it.ie SS WRP 10 provides its water repellent properties by deeply penetrating into pores and capillaries of cement. Increases strength of cement structure.Mostly use for Wet basements, patio pavers, concrete driveway, pool deck, Concrete floor, pond, bricks, concrete slabs, concrete blocks, thin concrete, Basement walls and floors, stone foundations, retaining walls.

• Penetrating and breathable.

• Imparts water repellency to a wide variety of substances.

• Reduces water absorption into the substrate, thus reducing Spilling due to freeze-thaw and efflorescence, thereby Increasing the life of the substrate.

• Colorless and non-yellowing protection preserves the natural appearance of the substrate.

• Nonflammable

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: 200 kg

Product Details:

Reactive Silicone based (Aquarest 1200)AQUAREST WR 1200 is a solvent soluble fast curing reactive silicone, used for imparting a colorless water repellent surface finish to mineral construction, Hydrophobing and moisture-proof treatment of cement and marble, paper, Textiles fabrics, metal, glass, ceramic, Wood and wood articles, leather etc.

Parameters Unit Value

Appearance Colorless

Sp Gravity 25 ^oC 0.96 – 0.99

Viscosity 25 ^oC cps 20 - 35

Silicone Water Repellent, Silicone Water prooging agent, silicone waterproof, Silicone

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: 200 kg

Product Details:

SS WR 1400 is an integral strength enhancer Admixture and water reducer ideal for strengthening the concrete. Initially, it acts as a dispersing agent, ensuring complete hydration of cement particles prior to initiation of crystallization process. The action makes concrete cohesive and gives superior workability to concrete mixture. It slowly becomes aagglomerator and helps to form strong bond within cement particles. This ensures cohesive mass with higher degree of compaction leaving very little chance for voids. It ensures much stronger concrete .

Prevents bleed of cement during casting.

Reduces capillary action, makes concrete crack free and gives superior finishing.

Makes concrete watertight and increases the strength. Concrete formed is impervious to water hence does not need further waterproofing.

Reduces water Intake by 30%.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Additional Information:

• Item Code: Admixture
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: 200 kg

Product Details:

Our WR 1500 as Retarding admixtures delays hydration of cement without affecting the long-term mechanical properties. They are used in concrete to offset the effect of high temperatures, which decrease setting times, or to avoid complications when unavoidable delays between mixing and placing occur . Uses of retarders in concrete pavement construction 1) enables farther hauling, thus eliminating the cost of relocating central mixing plants; 2) allows more time for texturing or plastic grooving of concrete pavements; 3) allows more time for hand finishing around the headers at the start and end of the production day; and 4) helps eliminate cold joints in two-course paving and in the event of equipment breakdown. Retarders can also be used to resist cracking due to form deflection that can occur when horizontal slabs are placed in sections. Because of these advantages, set retarders are considered the second most commonly used admixtures in the highway and Construction industry, especially in the construction of bridge.

Retarding admixtures are used to slow the rate of setting of concrete. By slowing the initial setting time the concrete mixture can stay in its fresh mix state longer before it gets to its hardened form.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: 200 kg